The Crafted Man - Limited Edition

$39.95

Product code: 
VSM750A

A hair & beard clipper designed for the manly man.
Packed with the essentials for easy grooming at home, or on-the-go.


Details

The Crafted Man is the tool for you to shape your finest look that's packed with the essentials for eay hair & facial grooming.
Rechargeable hair & beard clipper with accessories + travel bag.


• Precision W-Tech Blades - Cuts 25% faster*
• Smart Adjusting System - Maintains a constant cutting length
• Rechargeable - 45min cordless runtime

*Compared to traditional VSforMen stainless steel blades.

Backed by 2 Years Warranty.
Barcode: 
933-8841-0100-27

Tech-talk

CORDLESS, RECHARGEABLE
45min cordless runtime.
SMART ADJUSTING SYSTEM™
Ensures the length of the cut stays exactly the same, regardless of the cutting angle.
PRECISION W-TECH BLADES
High performance, high strength steel blades cut 25% faster*.
HAIR CLIPPING
2x hair cutting comb guides (3mm to 18mm + 21mm to 36mm) with 32 positions for short or longer hair clipping.
EASY ADJUSTMENT
Integrated dial adjusts hair clipping settings in 1mm steps with easy to read lateral display of selected length.
FACIAL GROOMING
1x 5 position precision comb guide (0.5mm to 4.5mm) for trimming stubble or short beard styles.
SMART SHAPE
Stands freely on your benchtop.
WASHABLE
Removable, washable blades, for your cleanest cut.
ACCESSORIES INCLUDED
Travel bag, barber comb, cleaning brush & oil.
WORLDWIDE VOLTAGE
Keep well groomed wherever you go.
PREPPING YOUR NEW TOOL

CHARGING
The Crafted Man Clipper hair and beard clipper is so easy to use. But before you start using your new tool, you must take the time to charge it overnight for 16 hours before its first use. Your new tool comes with a small amount of charge, but the initial charge will ensure your new tool will have optimum power performance to give you smooth fast cutting, every time.
-- Before using for the first time, fully charge your new tool continuously for 16 hours.
-- Maximum battery capacity will only be reached after 3 charging & discharging cycles.
-- Ensure your new tool is switched off.
-- Insert the small plug on the charging adaptor into the socket on the bottom of your new tool.
-- Plug the charging adaptor into a suitable mains power socket and switch on.
-- The charging LED indicator light on your new tool will remain on when correctly connected to the mains power.
-- After the first 3 full charges of 16 hours, all subsequent charges should be 8 hours.
-- A full charge of 8 hours will supply 45 minutes cordless runtime.
IMPORTANT NOTE - NEVER CHARGE THE CLIPPER FOR PERIODS LONGER THAN 24 CONSECUTIVE HOURS AND ONLY USE THE CHARGING ADAPTOR PROVIDED.

HOW TO USE THE CRAFTED MAN CLIPPER

BEFORE USING
• Always inspect the clipper blades for noticeable signs of damage.
• Ensure the clipper blades are well oiled before using.
• Always inspect the clipper blades before use to ensure they are free from hair, debris etc.
• Ensure the clipper is sufficiently charged before use.
• For best performance use on clean, dry hair that has been combed until tanglefree.

CLIPPING FOR ALL HAIR LENGTHS
The Crafted Man features 2x hair cutting comb guides (3mm to 18mm + 21mm to 36mm) with 32 positions for short or longer hair clipping.
1. Use the 3mm to 18mm comb guide for cutting short hair lengths
2. Use the 21mm to 36mm comb guide for cutting longer hair lengths, and pre-trimming down hair from longer lengths.
To attach the cutting guide, firstly position the control wheel of the clipper to the mark “3” on the side display.
• To attach a comb guide, ensure the appliance is switched off.
Position the comb guide over the front of the clipper blade and slide over the head. Push and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off. Push the tab on the rear of the comb guide away from the head and lift off.

SELECTING THE CUTTING LENGTH
To adjust the clipper’s cutting length, turn the dial up or down. The selected cutting length is displayed on the right or left side of the clipper, depending on the comb guide attached.
LEFT SIDE – 3mm to 18mm cutting lengths, use the shorter comb guide
RIGHT SIDE – 21mm to 36mm cutting lengths, use the longer comb guide

SMART ADJUSTING SYSTEM™
The Smart Adjusting System ensures the length of the cut stays exactly the same, regardless of the cutting angle. Cut as high as 75°C or as low as 35° & always achieve precision results.

CLIPPING TIPS

CLIPPING TIPS
Hit up www.vsformen.com.au for more grooming tips, inspiration & guidance on how to get the best use of your clipper.

CREATING AN ALL-OVER EVEN CUT
1. Ensure the clipper is switched off.
2. Attach the desired cutting comb guide and select the desired cutting length as required.
3. Switch the clipper on – the blades will start to move.
4. Start cutting at the nape of the neck, holding the clipper with the teeth of the clipper pointing upwards, ensuring that the comb guide is resting flat against the head.
5. Slowly move the clipper upwards and outwards through the hair towards your crown, against the direction of the hair growth. The comb guide will help to lift the hair and the blades will cut the hair to the length as shown on the comb guide.
6. Once the desired length is achieved at the back of the hair, start clipping the top and sides.
7. Hold the clipper to the front of your hair with the teeth pointing towards the back of your head, and move the clipper towards your crown. Repeat as necessary, moving in rows from the front and the sides of your head to the back.

CREATING A SHORT BACK & SIDES LOOK, WITH LENGTH ON THE TOP
1. Ensure the clipper is switched off.
2. Attach the desired cutting comb guide and select the desired cutting length as required.
3. Switch the clipper on – the blades will start to move.
4. Hold the clipper to the front of your hair with the teeth pointing towards the back of your head and move the clipper towards your crown. Repeat as necessary, moving in rows from the front and the sides of your head to the back.
5. If you then wish to take the back and sides of your hair to a shorter length, switch off the appliance and attach the shorter comb guide.
6. Start cutting at the nape of the neck, and with the comb guide flat against the head, move the clipper upwards and outwards over the area you want to take shorter.
7. Repeat on the sides of the hair, starting with the teeth of the clipper pointing upwards and comb guide flat against the area above the ear, again moving the clipper upwards and outwards.

OUTLINING
1. To tidy up the edges around your cut e.g. neckline and sideburns, detach the comb guides.
2. Hold the clipper upside down, so the front of the clipper is facing towards your head.
3. Hold the clipper straight on your sideburns or neckline and move the clipper downwards. This will give you a clean, smooth finish.

Where to buy

Myer